[Cisco SOLVED] Up To Date Cisco CCDP 300-115 Dumps Practice Exam Video Training Implementing Cisco IP Switched Networks 456Q&As Share[47-53]

What you should know about the Cisco 300-115 dumps? The Implementing Cisco IP Switched Networks (300-115 SWITCH) exam is a 120 minutes (30-40 questions) assessment in pass4itsure that is associated with the MCP certification.”Implementing Cisco IP Switched Networks” is the exam name of Pass4itsure Cisco 300-115 dumps test which designed to help candidates prepare for and pass the Cisco 300-115 exam. Up to date Cisco CCDP 300-115 dumps practice exam video training Implementing Cisco IP Switched Networks.

Past knowing the answer, and really understanding the 300-115 test questions puts you one stage in front of the test. Totally understanding an idea and thinking behind how something functions, makes your assignment https://www.pass4itsure.com/300-115.html dumps second nature.

[Cisco 300-115 Dumps SOLVED From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU

[Cisco 200-105 Dumps SOLVED From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E
300-115 dumps
Pass4itsure Cisco 300-115 Dumps Training Program Online Here(#2017)
QUESTION 47
A network engineer is setting up a new switched network. The network is expected to grow and add many new VLANs in the future. Which Spanning Tree Protocol should be used to reduce switch resources and managerial burdens that are associated with multiple spanning-tree instances?
A. RSTP
B. PVST
C. MST
D. PVST+
E. RPVST+
300-115 exam Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
Multiple Spanning Tree (MST) extends the IEEE 802.1w RST algorithm to multiple spanning trees. The main purpose of MST is to reduce the total number of spanning-tree instances to match the physical topology of the network and thus reduce the CPU cycles of a switch. PVRST+ runs STP instances for each VLAN and does not take into consideration the physical topology that might not require many different STP topologies. MST, on the other hand, uses a minimum number of STP instances to match the number of physical topologies present. Figure 3-15 shows a common network design, featuring an access Switch A, connected to two Building Distribution submodule Switches D1 and D2. In this setup, there are 1000 VLANs, and the network administrator typically seeks to achieve load balancing on the access switch uplinks based on even or odd VLANs–or any other scheme deemed appropriate.
300-115 dumps
Figure 3-15: VLAN Load Balancing
Figure 3-15 illustrates two links and 1000 VLANs. The 1000 VLANs map to two MST in
stances. Rather than maintaining 1000 spanning trees, each switch needs to maintain only two

QUESTION 48
Which statement about the use of SDM templates in a Cisco switch is true?
A. SDM templates are used to configure system resources in the switch to optimize support for specific features, depending on how the switch is used in the network.
B. SDM templates are used to create Layer 3 interfaces (switch virtual interfaces) to permit hosts in one VLAN to communicate with hosts in another VLAN.
C. SDM templates are used to configure ACLs that protect networks and specific hosts from unnecessary or unwanted traffic.
D. SDM templates are used to configure a set of ACLs that allows the users to manage the flow of traffic handled by the route processor.
E. SDM templates are configured by accessing the switch using the web interface.
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
You can use SDM templates to configure system resources in the switch to optimize support for specific features, depending on how the switch is used in the network. You can select a template to provide maximum system usage for some functions; for example, use the default template to balance resources, and use access template to obtain maximum ACL usage. To allocate hardware resources for different usages, the switch SDM templates prioritize system resources to optimize support for certain features.
Reference:
QUESTION 49
Which SDM template disables routing and supports the maximum number of unicast MAC addresses?
A. VLAN
B. access
C. default
D. routing
300-115 dumps Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
To allocate ternary content addressable memory (TCAM) resources for different usages, the switch SDM templates prioritize system resources to optimize support for certain features. You can select SDM templates to optimize these features: Access–The access template maximizes system resources for access control lists (ACLs) to accommodate a large number of ACLs. Default–The default template gives balance to all functions. Routing–The routing template maximizes system resources for IPv4 unicast routing, typically required for a router or aggregator in the center of a network. VLANs–The VLAN template disables routing and supports the maximum number of unicast MAC addresses. It would typically be selected for a Layer 2 switch.
Reference:
QUESTION 50
Which SDM template is the most appropriate for a Layer 2 switch that provides connectivity to a large number of clients?
A. VLAN
B. default
C. access
D. routing
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
To allocate ternary content addressable memory (TCAM) resources for different usages, the switch SDM templates prioritize system resources to optimize support for certain features. You can select SDM templates to optimize these features: Access–The access template maximizes system resources for access control lists (ACLs) to accommodate a large number of ACLs. Default–The default template gives balance to all functions.
Routing–The routing template maximizes system resources for IPv4 unicast routing, typically required for a router or aggregator in the center of a network. VLANs–The VLAN template disables routing and supports the maximum number of unicast MAC addresses (clients). It would typically be selected for a Layer 2 switch.
Reference:
QUESTION 51
In a Cisco switch, what is the default period of time after which a MAC address ages out and is discarded?
A. 100 seconds
B. 180 seconds
C. 300 seconds
D. 600 seconds
300-115 vce Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
To configure the aging time for all MAC addresses, perform this task: Command Purpose Step 1 switch# configure ter- Enters configuration mode. minal
  Step 2 switch(config)# mac-ad- Specifies the time before an entry ages out and is dis- dress-table aging-time carded from the MAC address table. The range is from seconds [vlan vlan_id] 0 to 1000000; the default is 300 seconds. Entering the value 0 disables the MAC aging. If a VLAN is not specified, the aging specification applies to all VLANs.
QUESTION 52
Click the exhibit button.
Which of the following statements best describes the format of data traffic sent from the PC to the server?
A. The source IP address will be the address of the PC, and the destination IP address will be the system IP address of router R1; the source MAC address will be the MAC address of the PC, and the destination MAC address will be the MAC address of the router R1 port connected to the PC.
B. The source IP address will be the address of the PC, and the destination IP address will be the IP
address of the router R1 port connected to the PC, the source MAC address will be the MAC address of the PC, and the destination MAC address will be the MAC address of the router R1 port connected to the PC.
C. The source IP address will be the address of the PC, and the destination IP address will be the IP address of the server, the source MAC address will be the MAC address of the PC, and the destination MAC address will be the MAC address of the server.
D. The source IP address will be the address of the PC, and the destination IP address will be the IP address of the server; the source MAC address will be the MAC address of the PC, and the destination MAC address will be the MAC address of the router R1 port connected to the PC.
Correct Answer: D
QUESTION 53
If two routers running IS-IS protocols are exchanging Hello packets with different authentication types, which of the following statements regarding the adjacency state established between them is true?
A. Different authentication types are not possible because IS-IS only supports password authentication.
B. An adjacency will not be formed
C. The two routers negotiate the authentication type and then reach the up state.
D. Only an L2 adjacency will form, as long as both routers are L2 capable.
300-115 exam Correct Answer: B
300-115 dumps

Your Cisco 300-115 dumps will liquefy in your grasp on the off chance that you know the rationale behind the ideas. Any honest to goodness Cisco CCDP prep materials ought to uphold this style of https://www.pass4itsure.com/300-115.html dumps learning – however you will be unable to discover more than a Cisco CCDP rehearse test anyplace other than Pass4itsure.